Toshiba 400CS User Manual page 136

6. Remove the metal cover.
7. Remove four flat-head M3x4 screws securing the frame to the HDD and separate
the HDD from the frame.
Installing the Hard Disk Drive
To install the hard disk drive, follow the steps below and refer to figures 4-16 and 4-17.
1. Secure the frame to the HDD with four flat-head M3x4 screws.
2. Attach the metal cover.
3. Seat the HDD in the computer and press to secure the connection.
4. Secure the HDD frame to the computer with two M2.5x6 screws.
5. Install the diskette drive or CD ROM drive, optional memory module, optional
PCMCIA card, and battery pack as described in sections 4.6 back through 4.2.
400 Series
Figure 4-17 Removing the HDD from the frame
4-19