Optional Memory Module - Toshiba 400CS User Manual

4.4

Optional Memory Module

Removing an Optional Memory Module
To remove an optional memory module, make sure the computer is in boot mode then follow
the steps below and refer to figures 4-6 and 4-7.
1. Turn the computer's power off. Disconnect the AC power cord and all external
cables connected to the computer.
2. Remove the battery pack and Optional PCMCIA card as described in sections 4.2
and 4.3.
3. Turn the computer upside down.
4. Remove two M2x4 screws securing the memory module socket cover.
5. Slide your fingernail or a thin object under the cover and remove it.
Figure 4-6 Removing the memory module socket cover
6. Remove two M2x4 screws securing the module to a brace at the center of the
module.
7. Lift up on the plastic tab to disengage the connectors, then grasp the module by
the edges and remove it.
4-10
Figure 4-7 Removing the memory module
400 Series