Accessing The Setup Program - Toshiba 400CS User Manual

3.25.2

Accessing the SETUP Program

Selecting 0 from the DIAGNOSTICS MENU and pressing Enter displays the following:
MEMORY
Total
Base
Extended
Shadow BIOS ROM
DISPLAY
Display Adaptor
LCD Display Mode
VGA Segment Address= E000H
LCD Display Colors = 16M Colors
Power On Display
Text Mode Stretch
HARD DISK HARD DISK
HDD Mode = Enhanced IDE (Normal)
POWER ON PASSWORD
Not Registered
↑↓→← : Select items, Space, BkSp : Change values
Esc: Exit without saving, Home: Set default values, End: Save changes and Exit
NOTE:
1. The Panel Power On/Off item appears only when the computer is in Resume mode.
2. The 400CS LCD Display Colors options are 222k and 4096 colors.
Moving Within the SETUP Menu and Changing Values
Press ← and → to move between the two columns. Press ↑ and ↓ to move be-
1.
tween items in a column.
2. Press either the space bar or BkSp to change the value.
Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following message is
displayed:
400 Series
SYSTEM SETUP
= 8192 KB
= 640 KB
= 7360 KB
= 192 KB
= VGA compatible
= Color
= Internal/External
= Enabled
Are you sure? (Y/N)
BIOS version = x.xx
COM/PCMCIA/PRT
Serial Port = COM1(IRQ4/3F8H)
Infrared Port = Not Used
Parallel Port = LPT1 (378H)
Sound System = Address/IRQ/DMA
OTHERS
Power-up Mode = Resume
CPU Cache = Enabled
Battery Save Mode = Full Power
Alarm Volume = High
System Beep = Enabled
Panel Power On/Off = Disabled
Alarm Power On = Disabled
Keyboard = Layout/Fn
Pointing Devices = Auto-selected
Boot Priority = FDD HDD
3-55