Toshiba 400CS User Manual page 165

4.21 400CDT FL
Removing the 400CDT FL
To remove the 400CDT FL, follow the steps below and refer to figures 4-43 and 4-44.
1. Turn the computer's power off. Disconnect the AC power cord and all external
cables connected to the computer.
2. Remove the battery pack, optional memory module, optional PCMCIA card,
display mask, FL inverter board and as described in sections 4.2, 4.3, 4.4, 4.16,
and 4.18.
3. Remove one M2x2 screw and two M2x3 screws securing the FL metal cover.
4. Lift off the cover.
4-48
Figure 4-43 Removing the 400CDT FL cover
400 Series