Table of Contents
Advertisement
4.7
Back Cover
Removing the Back Cover
To remove the T6600C's back cover, follow the steps below and refer to Figure 4-12.
1.
Turn off the power to the computer, then disconnect the power cord and all
external cables connected to the computer.
2.
Remove the optional PCMCIA card, optional memory card(s), keyboard unit, and
optional turbo cache memory module as described in Sections 4.2 through 4.5.
3.
Close the display panel, turn the computer so the back faces you, then turn it
upside down.
4.
Remove the six M3x6 silver screws from the back cover.
5.
Open the top of the connector panel and remove the M3x6 silver screw located
at the top center of the panel.
6.
Remove the back cover.
4-14
Figure 4-12 Removing the Back Cover
T6600C, T6600C/CD, T6600C/CDV
Advertisement
Table of Contents
Troubleshooting
