Table of Contents
Advertisement
3.20 Running Test
3.20.1
Function Description
This function automatically executes the following tests in sequence:
1.
System Test (Subtest 01)
2.
Memory Test (Subtests 01, 02, 04, 06 and 07)
3.
Display Test (Subtests 01 to 08)
4.
FDD Test (Subtest 02)
5.
HDD Test (Subtests 01 and 05)
6.
Real Timer Test (Subtest 02)
7.
Printer Test (Subtest 03)
8.
Async Test (Subtest 01)
The system automatically detects the number of floppy disk drives connected to the T6600C
for the FDD test.
3.20.2
Operations
CAUTION: Do not forget to load a work disk in the FDD. If a work disk is not
loaded, an error will be generated during the FDD testing.
1.
Remove the diagnostics disk from the floppy disk drive and insert the work disk.
2.
Select 6 from the Diagnostic Menu and press Enter , the following message
displays:
Printer wraparound test (Y/N) ?
Selecting Y (Yes) executes the printer wraparound test. A printer wraparound
connector must be connected to the PRT/FDD port on the back of the T6600C to
properly execute this test.
Select Y or N and press Enter . The following message appears:
3.
Serial #A wraparound test (Y/N) ?
Selecting Y (Yes) executes the ASYNC wraparound test. An RS-232-C wrap-
around connector must be connected to the serial port on the back of the T6600C
to properly execute this test.
T6600C, T6600C/CD, T6600C/CDV
3-47
Advertisement
Table of Contents
Troubleshooting
