Table of Contents
Advertisement
4.22 FL Inverter Board
Removing the FL Inverter Board
To remove the computer's FL inverter board, follow the steps below and refer to Figure 4-37.
1.
Turn off the power to the computer, then disconnect the power cord and all
external cables connected to the computer.
2.
Remove the display mask as described in Section 4.21.
3.
Disconnect the two FL cables from CN 2 and CN 3, and the display cable from
CN1 on the FL inverter board.
4.
Remove the three M3x6 screws securing the FL inverter board.
Installing the FL Inverter Board
To install the FL inverter board, follow the steps below and refer to Figure 4-37.
1.
Secure the FL inverter board with three M3x6 screws.
2.
Connect the two FL cables to CN 2 and CN 3, and the display cable to CN1.
3.
Install the display mask as described in Section 4.21.
4-44
Figure 4-37 Removing the FL Inverter Board
T6600C, T6600C/CD, T6600C/CDV
Advertisement
Table of Contents
Troubleshooting
