4.20 LED Board
Removing the LED Board
To remove the computer's LED board, follow the steps below and refer to Figure 4-35.
1.
Turn off the power to the computer, then disconnect the power cord and all
external cables connected to the computer.
2.
Remove the optional PCMCIA card, optional memory card(s), keyboard unit,
optional turbo cache memory module, back cover, optional expansion card, bot-
tom cover, HDD, 5.25-inch bay (T6600C) or CD-ROM drive (T6600C/CD and
T6600C/CDV), back panel board, DC fan unit, and system board as described in
Sections 4.2 through 4.5 and 4.7 through 4.15.
3.
Disconnect the LED cable from PJ1 and the display switch cable from PJ2 on
the LED board.
4.
Remove the two M3x6 screws securing the LED board and lift it out.
4-40
Figure 4-35 Removing the LED Board
T6600C, T6600C/CD, T6600C/CDV