Table of Contents
Advertisement
4.23 LCD Module
Removing the LCD Module
To remove the computer's LCD module, follow the steps below and refer to Figures 4-38 and
4-39.
1.
Turn off the power to the computer, then disconnect the power cord and all
external cables connected to the computer.
2.
Remove the display mask as described in Section 4.21.
3.
Disconnect the two FL cables from CN2 and CN3, and the display cable from
CN1 on the FL inverter board (Figure 4-38).
4.
Remove the four M3x6 screws securing the LCD module to the LCD cover
(Figure 4-38). Note the ground cable secured by the bottom left screw.
5.
Carefully rotate the LCD module forward (Figure 4-38).
T6600C, T6600C/CD, T6600C/CDV
Figure 4-38 Removing the LCD Module
4-45
Advertisement
Table of Contents
Troubleshooting
