Nortel CallPilot 100 Administration Manual page 87

Path:
RETRY END OK
x
MENU INFO OTHR
x
XFER LVMSG OTHR
x
PAGE ERASE
EXT
CHNG NEXT
Xfer bfore page: N
CHNG NEXT
Page type:
CHNG OK
Zone:
CHNG OK
Retries:
CHNG NEXT
Interval:
CHNG OK
CCR Admin
ADMIN
Enter the Path number and press OK.
7
For example, to create a Mailbox node on the second level of a CCR
Tree, enter ⁄⁄. The first 1 is the path of the first level Menu
node. The second digit is the path where you want to create the
Mailbox node.
Press OTHR.
8
Press OTHR.
9
10 Press PAGE.
11 If you want to transfer the call to an extension, press CHNG
and enter the extension or
if you do not, press NEXT.
If the call is not answered at this extension, it returns to the CCR
Tree and a park and page is performed.
12 Select CHNG if If you want the call to be immediately parked and
paged
or
select NEXT if you want the call to be transferred before it is parked
and paged.
13 Select they page type you want to use: SETS (internal zone), SPKR
(overhead paging), or BOTH. The default is SETS.
14 The default paging zone 1 appears.
To select a different zone, press CHNG and select the paging zone you
want to use: 2 3 4 5 6 or All.
If you use a CallPilot system with a Compact ICS select a number
from 1 to 3 or All. If in the previous step you selected SPKR, this
display does not appear.
15 The default number of retries, 1, appears.
To select a different number of retries, press CHNG and select a
number from 0 to 5 that is the number of times the system will try to
page to the paging zone.
16 The default interval of 15 seconds appears.
This is the number of seconds between paging retries. The retry time
is measured from the end of the playback of the page.
To specify a different interval, press CHNG and enter a value between
5-300 seconds.
17 Press ® to end the session.
Chapter 7 Working with CCR Trees
CallPilot Telephone Administration Guide
87