Nortel CallPilot 100 Administration Manual page 64

64 Chapter 5 Setting up the Auto Attendant
To route a phone number
Log:
QUIT RETRY
Admin
MBOX AA
Call id table
ADD CHNG
Ph:
RETRY
Destination
TABLE EXT
Call id table
ADD CHNG
N0025636 02
Press ≤·°‹.
1
OK
Enter the System Administrator Mailbox number and password,
and then press OK.
Enter ⁄⁄.
2
OTHR
Press ADD.
3
QUIT
4
Enter the phone number or the leading digits of a phone number
OK
(up to 13 digits) and press OK.
Each phone number assigned to the CLID Routing Table must be
unique.
5 Choose a destination.
OTHR
To route the phone number to a Greeting Table:
Press TABLE
•
• Enter a Greeting Table number from 1 to 4
Press OK
•
To route the phone number to an extension:
Press EXT
•
• Enter the extension number
Press OK
•
To route the phone number to a mailbox:
Press OTHR
•
Press MBOX
•
• Enter the mailbox number
Press OK
•
To route the phone number to a CCR Tree:
Press OTHR
•
Press CCR
•
• Enter the CCR Tree number from 1 to 8
Press OK
•
6
Repeat steps 3 through 5 for each phone number you want to route.
Press ® to end the session.
7
QUIT