Electrical Connections; Installation Of Aquasmart - Buderus Logano G125 BE US/CA Installation And Service Instructions Manual

7.6

Electrical Connections

This section only applies to G125 BE boilers equipped
with a Buderus Logamatic or Aquasmart control.
HEALTH DANGER
from electric shock.
WARNING!
All electrical work must be performed
by a qualified electrician.
Before opening the control: Shut off
electrical supply and prevent from acci-
dental reactivation.
Observe all installation instructions.

7.6.1 Installation of Aquasmart

An Aquasmart controls the boiler water supply tempera-
ture when not using a Buderus Logamatic control.
If a Beckett AquaSmart is being installed the factory-fit-
ted immersion well must be replaced by the immersion
well supplied with the control.
Install the Aquasmart according to manufacturers' in-
structions.
Install Aquasmart as per wiring diagram (Fig. 62,
page 67).
Logano G125 BE - Specifications subject to change without notice.
Fig. 28 Top rear cover removal
Boiler Installation 7
35