Electrical Connections; Logamatic Control Installation - Buderus Logano GB125/22 BE Installation And Service Instructions Manual

5.8

Electrical connections

This section only applies to boilers using Buderus con-
trols.
Danger: Risk of fatal injury from electric
shock!
V Electrical work may only be carried out by
qualified technicians.
V Before opening any electrical equipment,
isolate it from the power supply and take
steps to ensure it can not be inadvertently
reconnected.
V Follow the installation instructions.
V To remove top rear boiler jacket, remove 2 mounting
screws.
5.8.1

Logamatic control installation

V Position the tabs [2] of the control unit in the slots [3].
V Slide the control forward towards the burner door.
V Snap the flexible catches [1] into place in the knock-
outs provided [4].
Logano GB125 BE US/CA - Technical specifications are subject to change without prior notice.
Fig. 23 Removing rear boiler cover and cover plate
1
Fig. 24 Fitting the controls
1 Flexible catches
2 Tabs
3 Slots
4 Knock-outs
5
Boiler installation
2
3
4
7 747 019 141-21.1RS
29