10
Boiler Maintenance
10.6 Inspection and Maintenance Procedure
Sign off and date performed service work.
Service Work
1.
Check general status of system
2.
Do visual performance test on system
3.
Check fuel and water components for:
Leaks during operation
Hydrostatic water test
Visual corrosion
Exterior system changes
4.
Check flue passages for soot, shut off system
5.
Check burner operation (
6.
Check combustion air inlets and vent system
7.
Check system pressure, relief valve and expansion tank
8.
Check DHW tank anode status (
9.
Check control settings (
10. Final check, record combustion test results
Confirm service work
52
See burner manual)
See DHW tank manual)
See manual)
This service and maintenance protocol can also be
copied for further use.
Page Date: ______
48
51
Sign/Date
Logano G125 BE - Specifications subject to change without notice.
Date: ______
Date: ______
Sign/Date
Sign/Date