When you determine that the stack temperature is too
low, and condensate formation might take place in the
chimney, the stack temperature can be increased by the
following steps:
– Adjust the flue baffles
– Remove the flue baffles
– Remove flue blocking plates
Shut-off the boiler (
Chapter 9, page 47).
DANGER TO LIFE
from electric shock.
WARNING!
Prior to opening the burner: Shut off
power supply and prevent from acci-
dental reactivation.
Remove burner cover from boiler (
page 13).
BURNING DANGER
due to touching of hot surfaces.
CAUTION!
Wear thermal protective gloves or use
a set of pliers.
8.8.1 Adjusting/Removing Flue Baffles
Adjust or remove the flue baffles always in pairs.
Remove burner cable from burner connector.
For sealed combustion operation, remove hose from
burner intake connection.
Open burner door by removing the two hex head
bolts.
Close burner door and secure with burner door bolts
(ca. 90 Lbs/inch). Tighten bolts evenly.
Logano G125 BE - Specifications subject to change without notice.
Chapter 5.1,
Fig.43
Placing the Boiler in Operation
Adjusting the flue baffles
8
43