Electrical Supply Connections; Installing The Control Panel - Buderus Logano GB125 BE Installation And Maintenance Instructions Manual

5.8

Electrical supply connections

This section only applies to boilers using Buderus control
panels.
DANGER: Risk of fatal injury from electric
shock!
B Only qualified electricians are permitted to
carry out electrical work.
B Before opening up the boiler, isolate it
completely from the line voltage and
ensure the power cannot be inadvertently
reconnected.
B Follow the installation instructions.
B To remove top rear boiler jacket, remove 2 mounting
screws.
5.8.1

Installing the control panel

B Position the tabs [2] of the control panel in the slots [3].
B Slide the control panel forward towards the burner
door.
B Snap the flexible catches [1] into place in the knock-
outs provided [4].
Logano GB125 BE US/CA - Subject to technical modifications.
Installing the boiler
Fig. 23 Removing rear boiler cover and cover plate
1
Fig. 24 Installing the control panel
1 Flexible catches
2 Tabs
3 Slots
4 Knock-outs
5
2
3
4
7 747 019 141-21.1RS
27