Table of Contents
Advertisement
I
NSTALLATION
P
6
AGE
•
Fireplace must be installed on a level surface capable of supporting the fireplace and chimney
•
Place the ember strip included with the fireplace below the front edge of the fireplace.
EMBER STRIP
INSTRUCTIONS
Place this ember
strip under the front
of the fireplace and
the back edge of the
hearth.
NOTE: On the 36 ZC,
36 BI, and 44 BI the
ember strip will need to
be shortened.
Clearances
•
When installed, walls in front of the fireplace must be a minimum 18" to the side of the faceplate (or
15-1/2" from the side of the fireplace) – see the illustration on page 2
•
Fireplace should be located such that no doors, drapes, furniture or other combustibles can be placed
close or swing closer than the minimum 36" clearance. Due to the high heat output of this fireplace,
choose a location away from high traffic areas.
•
Fireplace must be placed so the vents below and above the glass do not become blocked
Corner Installation (minimum framing dimensions at 45°)
( C
ONTINUED
20-1/2"
22-1/4"
26"
66-1/2"
26"
)
The ember strip
insures no ember falls
between the fireplace
and hearth onto the
combustible floor.
Fireplace
(includes
1/2"
standoffs)
42"
93"
Hide quick links:
Advertisement
Table of Contents
