Table of Contents
Advertisement
5 Make sure the insulation between the firebox and fireplace can is still in place
6 If installing a catalyst temperature meter, do so now (see the instructions included with the
temperature meter).
7 The faceplate is packaged with the faceplate attachment screws. Use a phillips screwdriver to attach
the faceplate.
NOTE: do not pinch any of the wires in the lower right between the faceplate and the fireplace.
10 faceplate
attachment screws
come included with
the faceplate.
Phillips
Screwdriver
I
NSTALLATION
Before putting on the faceplate, make
sure the insulation is in place and forms
a barrier between the firebox and the
zero-clearance can. Check both sides
and above the firebox.
The switch plate
is installed here.
(C
)
ONTINUED
Faceplate
P
19
AGE
Hide quick links:
Advertisement
Table of Contents
