General Instructions; Onboard Tool Kit - BMW HP4 Rider's Manual

General instructions

9
The 'Maintenance' chapter de-
scribes work involving the check-
122
ing and replacement of wear
parts that can be performed with
a minimum of effort.
If special tightening torques are
to be taken into account for
assembly, these are listed. An
overview of all required tightening
torques is contained in the
chapter "Technical Data".
Information on additional main-
z
tenance and repair work is pro-
vided in the Repair Manual for
your vehicle on DVD, which you
can obtain from your authorized
BMW Motorrad retailer.
Special tools and thorough spe-
cialized knowledge are required
to carry out some of the work
described here. If you are in
doubt, consult an authorized
workshop, preferably your au-
thorized BMW Motorrad retailer.

Onboard tool kit

1 Spare fuses with gripper
Miniature fuses, 4 A and
7.5 A
2 Box wrench
Wrench size: 34 mm
Adjusting chain tension
( 134).
3 Socket wrench
Wrench size: 17 mm
Adjusting spring preload
on front wheel (
Adjusting spring preload
on rear wheel (
Use a plastic attachment
each to adjust the front
and rear spring preload.
Extension for hook
wrench.
4 TORX wrench, T25
Removing and installing
body panels.
5 Plastic attachment for
socket wrench
Adjusting spring preload
on front wheel (
6 Plastic attachment for
socket wrench
Adjusting spring preload
on rear wheel (
7 Extension for screwdriver
insert
49).
50).
49).
50).