BMW HP4 Rider's Manual page 55

Installing passenger seat
with passenger package
Mount passenger seat in
mounts 2 on left and right.
Press the rear seat forward
slightly then fold it down.
Lock seat lock with ignition
key.
OE
Removing driver's seat
Press cover of driver's seat
above screws 1 forward some-
what and hold in place.
Remove screws.
Push the driver's seat forward,
lift it at the rear and remove it.
When doing so, make sure that
the paneling is not damaged by
the screws.
Lay the driver's seat on a clean
surface with the upholstered
side down.
Installing driver's seat
Mount driver's seat in mount 2,
then position over screw sock-
ets 3. When doing so, make
sure that the paneling is not
damaged by the screws.
4
53
z