Mirror removal and
6
installation
100
Removing mirror
Make sure ground is level and
firm and park motorcycle.
z
Remove nuts 1 on left and
right and take off mirror.
Secure the paneling 2 on the
left and right to the fairing
bracket 3. If cable ties are
used, protect possible locations
of abrasion marks using an
adhesive strip.
Use the HP Race Cover
Kit from BMW Motorrad to
cover the exposed screw sock-
ets and secure the mounting
attachment.
Installing mirrors
Make sure ground is level and
firm and park motorcycle.
Remove fairing fastener.
Mount mirrors on left and right
in mounts 4.
Install nuts on back of fairing
with torque.
Mirror on front panel car-
rier
Securing device: mechanical
6 lb/ft (8 Nm)
License-plate carrier
Removing license-plate
carrier
Switch off ignition.