BMW HP4 Rider's Manual page 45

With the coding plug installed,
SLICK
the driving mode
is also offered in the selection
menu.
Installing coding plug (
SLICK mode is designed
4
for racing tires (slick tires)
and assumes very good adhesion
values, as are usually found on
44). racetracks only.
Enable SLICK mode on race-
tracks only, and only with racing
tires.
In RACE and SLICK mode,
increased flip over risk is
present, as lift-off detection for
the rear wheel is deactivated. In
SLICK mode, there is additional
risk of injury, as ABS control on
the rear wheel is deactivated for
the case that the footbrake lever
is actuated only.
Be prepared for lift-off of the
rear wheel in the case of hard
braking.
Press button 1 repeatedly until
selection arrow appears before
desired setting.
If the motorcycle is stopped,
the selected riding mode is
immediately activated.
The new riding mode is acti-
vated during operation under
the following conditions:
Brakes not engaged
Throttle turned all the way
back
Clutch disengaged
After the new riding mode is
activated, the selection menu
disappears.
The configured riding mode
with the corresponding adapta-
tions of the engine character-
istics, ABS, DTC, and DDC is
4
43
z