BMW HP4 Rider's Manual page 104

6
102
Press locking mechanism 7
to left with small screwdriver
while simultaneously sliding
connector toward rear off anti-
theft alarm system bracket.
Remove anti-theft alarm sys-
z
tem bracket.
Protect connector plugs on
motorcycle against contamina-
tion.
Detach screws 8 with wash-
ers and remove license-plate
carrier. Guide cable through
opening 9 when doing so.
with passenger package
Installing passenger seat
( 53).
Installing license-plate
carrier
Make sure ground is level and
firm and park motorcycle.
with passenger package
Removing passenger seat
( 52).
Position license-plate carrier
and guide cable through open-
ing 9.
Install screws 8 with washers.
OE
OE
Close connector so that lock-
ing mechanism 2 engages and