Installing Rear Wheel - BMW HP4 Rider's Manual

rear until rear-wheel rim can be
9
guided past it.
The chain sprocket and
140
the spacer sleeves on the
left and right are loosely inserted
in the wheel. When removing,
make sure that these parts are
not damaged or lost.

Installing rear wheel

Malfunctions may occur
during control interventions
by ABS and DTC if a wheel other
z
than the standard wheel is in-
stalled.
Please see the information on
the effect of wheel sizes on the
chassis control systems ABS
and DTC at the beginning of this
chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the tightening
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
Roll rear wheel on support into
swing arm until brake-caliper
support can be installed.
Mount brake caliper carrier in
guide 11.
Make sure that the ABS
sensor 9 is not damaged when
rolling the rear wheel into
place.
Roll rear wheel further into
swing arm while simultaneously