BMW HP4 Rider's Manual page 134

with competition kit
9
132
Operate clutch lever 2 until
resistance is felt.
z
Measure clutch play a between
handlebar fitting and clutch
lever in this position.
Clutch lever play
0.02...0.04 in (0.5...1.0 mm)
(on the handlebar fitting,
when the engine is cold)
OE
If clutch play is outside tolerance:
Adjusting clutch lever play
( 132).
Adjusting clutch lever
play
To increase clutch play: turn
the screw 1 into handlebar fit-
ting.
To decrease clutch play: turn
the screw 1 out of handlebar
fitting.
OE
with competition kit
To increase clutch play: turn
the screw 2 into handlebar fit-
ting.
To decrease clutch play: turn
the screw 2 out of handlebar
fitting.
Checking clutch lever play
( 131).
Repeat these operations until
the clutch play is correctly ad-
justed.