BMW HP4 Rider's Manual page 48

4
46
Rotate the adjusting screw 1
into the desired position by
applying gentle pressure from
z
the rear.
The adjusting screw can
be turned more easily if
you press the handbrake lever
forward when doing so.
Adjustment options:
from Position 1: largest dis-
tance between handlebar grip
and brake lever
up to Position 6: smallest dis-
tance between handlebar grip
and brake lever
OE
with competition kit
Rotate adjusting screw 2 in
the direction of A in order to
increase the distance between
handlebar grip and handbrake
lever.
Rotate adjusting screw 2 in
the direction of B in order to
decrease the distance between
handlebar grip and handbrake
lever.
The adjusting screw can
be turned more easily if
you press the handbrake lever
forward when doing so.
Adjusting footbrake lever
OE
with competition kit
Make sure ground is level and
firm and park motorcycle.
Remove screw 1.
Position foot piece 2 in desired
position and install screw 1
with specified torque.
Foot piece on foot pedal
7 lb/ft (10 Nm)