BMW HP4 Rider's Manual page 138

9
136
Remove screw 1 and extract
the ABS sensor from its
socket.
Mask off area of wheel rim that
z
could be scratched in process
of removing brake calipers.
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake rotor on reassem-
bly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove screws 2 of brake
calipers on left and right.
Push brake pads 3 apart
slightly by turning the brake
caliper 4 back and forth against
the brake rotor 5.
Carefully pull brake calipers
back to remove them from the
brake rotors.
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends BMW Motorrad rear
wheel stand.
Mounting rear wheel stands
( 143).
Raise front of motorcycle until
the front wheel can turn freely.
BMW Motorrad recommends