4
52
Unlock lock 1 in the seat humb
cover using the vehicle ignition
key.
z
Lift cover at rear, then remove
by pulling back and upward.
Installing the seat humb
cover
Mount seat humb cover in
mounts 2 on left and right.
Press the cover forward slightly
then fold it down.
Lock lock with ignition key.
Removing passenger seat
with passenger package
Make sure ground is level and
firm and park motorcycle.
Unlock seat lock 1 with the
vehicle ignition key.
Lift passenger seat at rear,
then remove by pulling back
and upward.
Remove ignition key and lay
passenger seat on a clean sur-
face with the upholstered side
on the bottom.
OE