BMW HP4 Rider's Manual page 99

3 Link blocks with central bore
hole.
Adjusting running gear
height
Lift the motorcycle using a
suitable auxiliary stand such
that the spring strut is relieved.
Remove screw 2 and take out
link block 1.
Remove link block 3 from the
right side.
Select a pair of link blocks
according to the requested
height.
Insert small link block with
thread 3 on the right side.
Insert wide link block with re-
cess 2 on the left side.
Install screw 1 with specified
torque.
6
97
z