BMW HP4 Rider's Manual page 96

In order to adjust the rebound
6
stage, press buttons 1 respec-
tively 2, until position 3 shows
94
"DDC-RE" (DDC-REAR) and
position 4 "REB:" (Rebound).
Press and hold button 2, until
the value next to "REB:" re-
spectively "COM:" is flashing.
Adjust damping as desired us-
ing buttons 1 and 2.
+1 .. +7: Damping increase in
maximum seven steps.
-1 .. -7: Damping decrease in
maximum seven steps.
0: Basic setting.
z
Adjusting damping on
front wheel
Make sure ground is level and
firm and park motorcycle.
Switch into SETUP mode.
Without leveling sensor on the
front wheel:
In order to adjust damping,
press buttons 1 respectively 2,
until position 3 shows "DDC-
FR" (DDC-FRONT) and posi-
tion 4 "DMP:" (Damping).
Press button 2, until the value
next to "DMP:" is flashing.
Adjust damping as desired us-
ing buttons 1 and 2.
+1 .. +7: Damping increase in
maximum seven steps.
-1 .. -7: Damping decrease in
maximum seven steps.
0: Basic setting.
With leveling sensor on the front
wheel:
In order to adjust the com-
pression stage, press but-
tons 1 respectively 2, until
position 3 shows "DDC-FR"
(DDC-FRONT) and position 4
"COM:" (Compression).
In order to adjust the rebound
stage, press buttons 1 respec-
tively 2, until position 3 shows
"DDC-FR" (DDC-FRONT) and
position 4 "REB:" (Rebound).