Toyota 1HD-FT Repair Manual page 220

ENGINE - LUBRICATION SYSTEM
EG-207
4. INSTALL RELIEF VALVE
Install a new gasket and the relief valve.
Torque: 39 N·m (400 kgf·cm. 29 ft·lbf)
5. INSTALL CHECK VALVE
Install a new gasket and the check valve.
Torque: 27 N·m (275 kgf-em. 20 ft·lbf)
6. INSTALL WATER TEMPERATURE SENSOR
Install a new gasket and the sensor.
Torque: 19.8 N·m (200 kgf·em. 14 ft·lbf)
7. INSTALL OIL FILTER
(See step 2 in oil and filter replacement)
6. INSTALL INJECTION PUMP
(See steps 1 to 3 in injection pump installation
in Fuel System)
9. INSTALL INJECTION PIPES
(Se8 steps 3 and 6 in injection nozzle installation
in Fuel System)
10. INSTALL NO.2 CAMSHAFT TIMING PULLEY
(See step 3 in timing belt installation in Engine
Mechanical)
11. INSTALL TIMING BELT
(S88 steps 5 to lOin timing belt installation in
Engine Mechanical)
12. FILL WITH ENGINE COOLANT
13. START ENGINE AND CHECK FOR LEAKS
14. CHECK ENGINE OIL LEVEL