Toyota 1HD-FT Repair Manual page 148

ENGINE - FUEL SYSTEM
EG-135
",m
SST
22. REMOVE PUMP PLUNGER
Using SST, remove the pump plunger and plunger
adjusting shim together with these parts:
(1) Spill ring
(2) Lower spring seat
(3) Upper plunger plate
(4) Lower plunger plate
SST 09260-54012 (09269-54030)
11q]
NOTICE: Do not touch the sliding lurfac•• of the pump
plunger with your hand.
23. REMOVE GOVERNOR LINK
Using SST. remove the 2 support bolts. gaskets and
SST
governor
link.
SST 09260-54012 (09269-54040)
111-----0
(2)~
(3)------@
(4l------<§;l
""°"1
Shim_
Pllll86
24. REMOVE FACE CAMP LATE AND COUPLING
Remove the face camplat8 and coupling.
25. REMOVE ROLLER RING AND DRIVE SHAFT
(a) Remove the timer clip and stopper pin.
(b) Push the slide pin toward inside.
Slide Pin
P121'lEl