Toyota 1HD-FT Repair Manual page 147

EG·134
ENGINE - FUEL SYSTEM
EG
r-
ftIP)
~W~
A~
(3)
~
(2)
'-
"""
(e) Remove these parts from the flyweight holder:
(1) Governor sleeve
(2) No.2 flyweight washer
(3) 4 flyweights
5mm
Hexagon
Wrench
19. REMOVE INJECTION PUMP STAY AND FUEL PIPE
BRACKET
(a) Using a 5 mm hexagon wrench. remove the 4 bolts
and injection pump stay.
(b) Remove the bolt and fuel pipe bracket.
20. REMOVE DISTRIBUTIVE HEAD PLUG
Using SST. remove the distributive head plug and D-
ring.
SST 09260-54012 (09262-54010)
5mm
Hexagon
Wrench
21. REMOVE DISTRIBUTIVE HEAD
(a) Using a 5 mm hexagon wrench. remove the 4 bolts
and wire clip.
(b) Remove the distributive head and these parts:
(1) 2 lever support springs
(2) 2 plunger spring guides
(3) 2 plunger spring shims
(4) 2 upper spring seats
(5) 2 plunger springs