Toyota 1HD-FT Repair Manual page 160

ENGINE - FUEL SYSTEM
EG-147
1'23523
18. ASSEM8LE 800ST COMPENSATOR
A. InstaU overflow screw
(a)
wi
BACS:
Install the overflow screw with a new gasket.
Torque: 24.55 N·m (250 kgf·cm. 18 ft·lbfj
(b)
w/o
BACS:
Install the overflow screw.
Torque: 24.55 N·m (250 kgf·cm. 18 ft.lbf)
E
(e) w/o BACS:
Install the rubber cap facing the arrow downward.
B. Install No.2 SICS lever
(a) Assemble these parts to the No.2 SICS lever.
(1) Washer
(2) New a-ring
(b) Install the No.2 SICS lever. washer and 0 - ring as-
sembly to the governor cover.
C. Install control lever
(a) Insert the connecting pin into the governor cover.
(b) Using a small screwdriver. install the control lever
with the support pin.
4 mm
Hexagon
Wrench
(c) Using a 4 mm hexagon wrench. install 2 new gaskets
and the 2 bolts.
Torque: 6.85 N·m (70 kgf-cm. 61 in .. lbf)