Cisco Nexus 7706 Hardware Installation Manual page 98

Installing or Replacing a Fabric Module
The handles click when fully rotated to the front of the module.
Figure 30: Securing the Fabric Module to the Slot
1 Rotate the handles to the front of the module until
they click.
h) Verify that the module is secured to the chassis and that you cannot remove it without pressing the eject buttons.
Step 4 Reinstall the fan tray over the installed fabric module as follows:
a) Hold both fan tray handles with both of your hands and align the back side of the fan tray to the open fan tray slot.
Cisco Nexus 7706 Hardware Installation Guide
88
Installing or Replacing Modules, Fan Trays, and Power Supplies
OL-31330-01