Cisco Nexus 7706 Hardware Installation Manual page 92

Replacing a Fan Tray
c) Pull the fan tray straight out of the slot.
Figure 25: Removing a Fan Tray
1 Unscrew four captive screws.
d) Set the fan tray on an antistatic surface or inside an antistatic bag.
Do not touch the electrical connectors on the back side and do not set the back side connectors on
Caution
anything—always set a fan tray down on a covered side to protect its connectors.
Step 2
Install the new fan tray in the open slot as follows:
a) Unpack the new fan tray and inspect it for damage.
If anything is damaged or missing, contact your customer representative immediately.
b) Hold both fan tray handles with both of your hands and align the back side of the fan tray to the open fan tray slot.
Cisco Nexus 7706 Hardware Installation Guide
82
Installing or Replacing Modules, Fan Trays, and Power Supplies
2 Pull on both handles to remove fan tray from the
chassis.
OL-31330-01