To Set Up And Install The Switch In Your Network - ProCurve 6400cl Management And Configuration Manual

To Set Up and Install the Switch in Your
Network
Use the ProCurve Installation and Getting Started Guide (shipped with the
switch) for the following:
■ Notes, cautions, and warnings related to installing and using the switch
and its related modules
■ Instructions for physically installing the switch in your network
Quickly assigning an IP address and subnet mask, set a Manager pass­
■
word, and (optionally) configure other basic features.
■ Interpreting LED behavior.
For the latest version of the Installation and Getting Started Guide for your
switch, refer to "Getting Documentation From the Web" on page 1-6.

To Set Up and Install the Switch in Your Network

Getting Started
1-9