Serially Connected Host - ProCurve 6400cl Management And Configuration Manual

For example, the following command copies a startup-config file named test­
01.txt from a (UNIX) TFTP server at IP address 10.10.28.14 to the first empty
memory slot in the switch:
ProCurve(config)# copy tftp config test-01 10.10.28.14
test-01.txt unix
Xmodem: Copying a Configuration File to a

Serially Connected Host

Syntax: copy config < filename > xmodem < pc | unix >
This is an addition to the copy < config > xmodem command
options existing in releases prior to E.09.xx. Use this
command to upload a configuration file from the switch to
an Xmodem host.
For more on using Xmodem to copy a file to a serially
connected host, refer to "Xmodem: Copying a Configuration
File from the Switch to a Serially Connected PC or UNIX
Workstation" on page A-25.
Xmodem: Copying a Configuration from a Serially
Connected Host
Syntax: copy xmodem config < dest-file > < pc | unix >
This is an addition to the copy xmodem command options
existing in releases prior to E.09.xx. Use this command to
download a configuration file from an Xmodem host to the
switch.
For more on using Xmodem to copy a file from a serially
connected host, refer to "Xmodem: Copying a Configuration
File from a Serially Connected PC or UNIX Workstation" on
page A-26.
Switch Memory and Configuration
Multiple Configuration Files on 5300xl and 4200vl Switches
6-37