Cli: Viewing And Configuring Snmp Community Names - ProCurve 6400cl Management And Configuration Manual

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
If you are adding a
community, the
fields in this screen
are blank.
If you are editing an
existing community,
the values for the
currently selected
Community appear
in the fields.
15-14
Figure 15-6. The SNMP Add or Edit Screen
Need Help? If you need information on the options in each field, press
to move the cursor to the Actions line, then select the Help option
[Enter]
on the Actions line. When you are finished with Help, press
to return the cursor to the parameter fields.
3. Enter the name you want in the Community Name field, and use the Space
bar to select the appropriate value in each of the other fields. (Use the
key to move from one field to the next.)
[Tab]
4. Press [Enter] , then

CLI: Viewing and Configuring SNMP Community Names

Community Name Commands
show snmp-server [<community-string>]
[no] snmp-server
[community <community-str>]
[host <community-str> <ip-addr>]
[<none | debug | all | not-info | critical>]
[enable traps <authentication>
Listing Community Names and Values. This command lists the data for
currently configured SNMP community names (along with trap receivers and
the setting for authentication traps — see "SNMPv3 Notification and Traps"
on page 15-16).
Syntax: show snmp-server [<community-string>]
(for Save).
[S]
Page
15-14
15-15
15-15
15-20
15-22
Type the value for this field.
Use the Space bar to select
values for other fields
(for Edit)
[E]