ProCurve 6400cl Management And Configuration Manual page 538

Troubleshooting
Diagnostic Tools
C-50
IP routes
■
■ Status and counters — VLAN information
■ GVRP support
Load balancing (trunk and LACP)
■
Syntax: show tech
Executing show tech outputs a data listing to your terminal emulator. However,
using your terminal emulator's text capture features, you can also save
data to a text file for viewing, printing, or sending to an associate. For
tech
example, if your terminal emulator is the Hyperterminal application available
with Microsoft® Windows® software, you can copy the show tech output to
a file and then use either Microsoft Word or Notepad to display the data. (In
this case, Microsoft Word provides the data in an easier-to-read format.)
To Copy show tech output to a Text File. This example uses the
Microsoft Windows terminal emulator. To use another terminal emulator
application, refer to the documentation provided with that application.
1. In Hyperterminal, click on
Figure C-21. The Capture Text window of the Hyperterminal Application
2. In the field, enter the path and file name under which you want to store
File
the output.
show tech
Figure C-22. Example of a Path and Filename for Creating a Text File from show
tech Output
3. Click to create and open the text file.
[Start]
|
Transfer Capture Text...
show