Advertisement
Downloading Switch Software and Documentation from the Web
To Download a Software Version:
1. Go to the ProCurve website at
2. Click on
Software updates
3. Under latest
, click on
software
To Download Product Documentation: You will need the Adobe® Acrobat® Reader to view, print, and/or copy the
product documentation. You can download the latest version from Adobe at http://www.adobe.com.
1. Go to the ProCurve website at
2. Click on
Technical Support
3. Click on the name of the switch product for which you want documentation. (For a module, click on the name
of the switch product with which it is used.)
4. On the resulting web page, double-click on a document you want.
5. When the document file opens, click on the disk icon
Updating Software
This section explains how to upgrade the following software images on the management and interface modules:
•
Monitor
•
Boot
•
ProCurve Software
•
Field-Programmable Gate Array (FPGA) (interface modules only)
The sequence for a complete system upgrade is:
A. Upgrade the management module's monitor and boot images
B. Upgrade the management module's ProCurve software image
C. Upgrade the interface module's monitor and boot images
D. Upgrade the interface module's ProCurve software image
E. Upgrade the interface module's FPGA images
F. Reboot using the boot system command
A. Upgrading the Management Module's Monitor and Boot Images
Software releases 02.0.00a and later enable you to upgrade the management module's monitor and boot images
simultaneously. Both images are contained in a single file, which is placed in both the boot flash and the code flash.
To upgrade the management module's monitor and boot images simultaneously, perform the following steps:
1. Place the new monitor-and-boot-image file on a TFTP server to which the system has access or on a PCMCIA
flash card inserted in slot 1 or 2.
http://www.procurve.com
.
.
switches
http://www.procurve.com
, then
.
Product manuals
in the Acrobat toolbar and save a copy of the file.
3
Advertisement
