ProCurve 6400cl Management And Configuration Manual page 409

Syntax: [ no ] lldp config < port-list > medPortLocation < Address-Type >
Configures location or emergency call data the switch
advertises per port in the location_id TLV. This TLV is for
use by LLDP-MED endpoints employing location-based
applications.
Note: The switch allows one medPortLocation entry per
port (without regard to type). Configuring a new
medPortLocation entry of any type on a port replaces
any previously configured entry on that port.
civic-addr <
[< CA-TYPE > < CA-VALUE >] . . . [< CA-TYPE > < CA-VALUE >]
This command enables configuration of a physical address
on a switch port, and allows up to 75 characters of address
information.
COUNTRY-STR
ISO 3166. Some examples include FR (France), DE
(Germany), and IN (India). This field is required in a
civic-addr command. (For a complete list of country codes,
visit www.iso.org on the world wide web.)
WHAT:
to which the location data applies:
0: Location of DHCP server
1: Location of switch
2: Location of LLDP-MED endpoint (recommended
This field is required in a civic-addr command.
Type/Value Pairs (
series of data pairs, each composed of a location data
"type" specifier and the corresponding location data for
that type. That is, the first value in a pair is expected
to be the civic address "type" number (
second value in a pair is expected to be the
corresponding civic address data (
example, if the
type/value pair to define the city of Paris is "
Multiple type/value pairs can be entered in any order,
although it is recommended that multiple pairs be
entered in ascending order of the
— Continued —
Configuring for Network Management Applications
COUNTRY-STR > < WHAT > < CA-TYPE > < CA-VALUE > . . .
: A two-character country code, as defined by
A single-digit number specifying the type of device
application)
CA-TYPE
for "city name" is "
CA-TYPE
LLDP (Link-Layer Discovery Protocol)
and ): This is a
CA-VALUE
), and the
CA-TYPE
). For
CA-VALUE
", then the
3
3 Paris
.
CA-TYPE
".
15-55