Registering An Smb Destination - Konica Minolta bizhub C3850 User Manual

2.9 Registering a destination
Settings
[Password]
[PASV Mode]
[Proxy]
[Port Number]

Registering an SMB destination

An FTP destination can be registered or edited using Web Connection.
In the administrator mode, select [Address] - [Address Book] - [Address Book List] - [New Registration] -
[SMB] - [Next], then configure the following settings.
Settings
[No.]
[Name]
[Index]
[Host Address]
[File Path]
[User ID]
[Password]
bizhub C3850/C3350
Description
Enter the password (using ASCII characters of up to 63 bytes).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.
Enter the E-mail address as a destination (using ASCII characters of up to 320
bytes).
[On] is specified by default.
When a proxy server is used in your environment, select [On].
[Off] is specified by default.
If necessary, change the port number.
Normally, you can use the original port number.
[21] is specified by default.
Description
Destination registration number. If you enter 0, the smallest available number
is automatically assigned. If you want to specify a number, enter the number
within the range of 1 to 2000.
Enter the destination name (using up to 72 bytes).
Select a corresponding character so that the destination can be index
searched by registration name.
If the [Main] check box is selected, you can easily specify a destination.
Enter the host name or IP address of a destination computer.
• Example of computer name (host name) entry: "HOME-PC"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
Enter the shared folder name of the computer specified in [Host Address] (us-
ing up to 255 bytes).
• Entry example: "scan"
When specifying a folder in the shared folder, insert a symbol, "\", between
folder names.
• Entry example: "scan\document"
Enter the name of a user who has privileges to access the folder specified in
[File Path] (using up to 255 bytes).
Enter the password (using up to 127 bytes).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.
2
2-27