Table of Contents
Advertisement
POS Interface
Rev 1.00
Typical set up for cash register with cash register number only
1.
Set the Text Protocol Setup screen as shown below.
2.
Set the Text Parsing screen as shown below.
One HRDV unit can currently interface up to a maximum of four cash registers.
The above settings assume that the cash registers are numbered 2, 3, 4, and 5. The HRDV
triggers off of string "2" for port 1 in the above example. All transactions with "2" starting at
the 4th byte from the data string end will be associated with virtual port 1. To display or store
this data you must program the following additional screens:
1.
Set the correct communications parameters on the Text Port screen (MENU
➤
System Setup
Text Ports).
Set the Baud rate, stop bits, data bits, and parity.
2.
Set which camera will display the text on the Video Input screen (MENU
➤
Setup
Video Inputs).
3.
Program to record the required camera(s) on the Text Event screen (MENU
➤
Recording
Text Events).
4.
Set the Text Trigger screen to trigger all (MENU
➤
Text Trigger Strings).
➤
Event Recording
178
➤
➤
System
➤
Event
➤
Text Events
Document 900.0261
04/05
Advertisement
Table of Contents
