POS Interface
Rev 1.00
Set the Text Protocol Setup screen as shown below.
Set the Text Parsing screen as shown below.
The above settings assume that the cash registers are numbered 27, 28, 29, and 30. The
HRDV triggers off of string "27" for port 1 in the above example. All transactions with "27"
starting at the 2nd byte from the data string beginning will be associated with virtual port 1.
To display or store this data you must program the following additional screens:
1.
Set the correct communications parameters on the Text Port screen (MENU
➤
System Setup
Text Ports).
Set the Baud rate, stop bits, data bits, and parity.
2.
Set which camera will display the text on the Video Input screen (MENU
➤
Setup
Video Inputs).
3.
Program to record the required camera(s) on the Text Event screen (MENU
➤
Recording
Text Events).
4.
Set the Text Trigger screen to trigger all (MENU
➤
Text Trigger Strings).
➤
Event Recording
176
➤
➤
System
➤
Event
➤
Text Events
Document 900.0261
04/05