Firmware Version - Panasonic UF-8300 Service Manual

3.5.7. Firmware Emergency Recovery
The easiest method to recover the firmware in an Emergency Recovery routine is to use the Master SD
Memory Card method (1 SD Memory Card required if the SD Memory Card capacity is Large enough size
for all necessary Firmware).
If the Master SD Memory Card includes all necessary firmware as a package, all necessary firmware can
be recovered once, except the G3 Fax option.
After recovering, if optional G3 firmware is required, use the Network Firmware Update Tool, the Local
Firmware Update Tool or use the Master SD Memory Card to update the firmware selecting the "Auto
Mode" to the required level.
If the unit does not boot up properly, follow the steps below:
1. Turn the power OFF.
Before proceeding to the next step, you must create the Master SD Memory Card (read the appropriate
sections first 3.5.5.).
2. Turn the power On while holding the [ENERGY SAVER] button.
3. When the green lamp on the front panel turns On, release the [ENERGY SAVER] button.
The unit is now ready to accept the firmware code from Master SD Memory Card.
If there is additional G3 firmware code file to be updated, use the Master SD Memory Card to update the
firmware using the "Auto Mode" again.
3.5.8.

Firmware Version

SC :
UF-8200 or 7200 A A Vxxxxx AU
G3 :
UF-82 G3B AA Vxxxxx YC
Destination Code (Fax)
AU : USA/Canada
EB : UK etc.
Firmware Version (V1xxxx)
Language Code
A : A-English, C-French & Spanish
etc.
Firmware Type
A : Standard
Model Number
YC: Fixed
Firmware Version (V1xxxx)
AA: Fixed
2nd G3
Model Number
68
UF-8300/8200
UF-7300/7200