Panasonic UF-8300 Service Manual page 171

No. Parameter
044 REDIAL COUNT
045 RING DET.
COUNT
046 ON-HOOK TIME
047 RESPONSE
WAIT
048~ Not Used
049
050 RING DET.
MODE
051 Not Used
052 PULSE RATE
053~ Not Used
054
055 BUSY TONE
CHECK
056 DIAL TONE
CHECK
057 DC LOOP
CHECK
(Except for USA
and Canada)
058 COMM.JNL +
IMAGE
059 Not Used
060 VERSION
061 TX/RX/PRT/CPY TX:****** PRT:******
062 PRINT
COUNTER
063~ Not Used
067
Function Parameter Table
Selections
0 = no redial
~
15 = 15 times
1 = 1 ring
~
9 = 9 rings
0 = 0 sec.
~
90 = 90 sec.
1 = 1 sec.
~
90 = 90 sec.
20 ~ 150 sec.
(For France Only)
1 = Normal
2 = Rough
1 = 10 pps
2 = 20 pps
1 = Off
2 = On
1 = Off
2 = On
1 = Off
2 = On
1 = Off (without image)
2 = On (with image)
Indicates the Host
software version.
RX:****** CPY:******
1 = Off
2 = On
Selects the redial count from 0 to 15 times in 1 step
intervals.
Note:
In order to comply with the TBR21 requirement for
the EC destinations, do not select 15 times.
Selects the ring detection count from 1 to 9 rings in 1
ring step intervals.
Selects the on-hook time between sequential
communication calls in 1 second step intervals.
Selects the waiting interval for the response after
completing the dialing.
Selects the quality of ringer detection. Use if the line
signal is out of regulation, set to "Rough" so that the
unit may detect the ringing signals.
Selects the dial pulse rate 10/20 pps.
Selects whether to detect the Busy Tone.
Selects whether to detect Dial Tone before dialing the
telephone number.
Selects whether the unit checks the DC Loop during
communication.
Selects whether the machine prints the COMM.
Journal with image.
Displays the transmitted, received, total printed and
copied document count.
Selects whether to print in the Fax Parameter List,
the counter information that is displayed in the
Function Parameter No. 61.
171
UF-8300/8200
UF-7300/7200
Function