Panasonic UF-8300 Service Manual page 222

9.1.4. To Retrieve Each Parameters
To retrieve the existing parameters, send a plain text email to your machine's email address with the
following command in the "Subject" line:
#get parameters(password)#
#get abbr(password)#
#get jnl(password)#
: where the "password" is the Remote Password programmed in your machine's User Parameters
(i.e. 123456789).
Make sure that the CC..., Bcc... lines and the body of the email message is Blank.
(1) To : Your machine's email address.
From : This field is normally not visible when creating new email message(s).It is your default email
address (email application), for retrieving the Internet Parameters and for error message
notification.(Can be programmed with the configuration tool of your email program.)
Subject : To Retrieve data, type : #get parameters(password)#
Using Email to Retrieve the Journal
The Journal will be sent back to the originating station's email address.
After receiving the journal, use a fixed width font (i.e. Courier), in order to align the received journal's
contents on the PC.
9.1.5. To Edit the Retrieved or Backup Internet Parameters/Auto Dialer File
After receiving your machine's email with the Internet Parameters and/or Auto Dialer, store the email file as
text (.txt) on your PC for backup purposes.
To change or update the Internet Parameters and/or Auto Dialer, type the following command in the
"Subject" line of your email and follow the steps below:
#set parameters(password)#
#set abbr(password)#
: where the "password" is the Remote Password programmed in your machine's User Parameters
(i.e. 123456789).
Make sure that the CC..., Bcc... lines and the body of the email message are Blank.
: To retrieve the Internet Parameters
: To retrieve the Auto Dialer
: To retrieve the Journal (Transaction Journal)
Ex: Internet Parameters
IFAX
( )
#get abbr(password)#
#get jnl(password)#
: To store the Internet Parameters
: To store the Auto Dialer
(1)
222
UF-8300/8200
UF-7300/7200