Panasonic UF-8300 Service Manual page 212

(10) Install the Harness Clamp and insert the G3 Harness
into it as illustrated.
(11) Insert the G3 Harness into the Edge Saddle.
(12) Connect the G3 Harness to CN510 on the SC PC
Board.
(13) Proceed with the installation of other options. If
finished, reinstall all Harnesses and Covers.
(14) Reinstall the SD Memory Card if it was removed.
(15) Plug the AC Power Cord first, then reconnect the
Telephone Line Cable.
(16) Reconnect the LAN / USB Cable(s) if disconnected.
212
UF-8300/8200
UF-7300/7200