Reception Problems; Polling Problems - Panasonic UF-8300 Service Manual

4.5.5.

Reception Problems

Does the machine answer
the Ringing signal?
Is the received copy OK?
Any other problems?
4.5.6.

Polling Problems

Is Polling reception OK?
Is Polling transmission OK?
Any other problems?
Note:
No-check Mode means that password is not set.
START
No
Yes
No
Yes
Yes
No
END
START
No
Yes
No
Yes
Yes
No
END
1. Set "RCV = AUTO"
2. Check that all covers are closed firmly.
3. Check the telephone line connection.
4. Check the Ringer Timing, or DRD setting.
5. Check the recording paper path.
6. Check the SC PCB, and MJR PCB.
7. Replace the MJR PCB.
8. Replace the SC PCB.
Make a copy, and refer to Sect. 4.3.14.
See Sect. 4.3. (Troubleshooting with the
Information Codes).
1. Set the same polling password as the other party is
using.
2. Check the password of the remote unit.
1. Set the polling password, or no - check mode.*
2. Check the password of the remote unit.
See Sect. 4.3. (Troubleshooting using information codes).
122
UF-8300/8200
UF-7300/7200